Global-EnglishFrenchPolish
  1. Home
  2. Electrical metrology
  3. Power quality analyzers
EPPE RX for Power Quality Measurement

EPPE RX

POWER QUALITY ANALYZER


  • ✔ Digital fault recorder
  • ✔ Energy and power measurement
  • ✔ Dynamic RMS noise recorder

EPPE RX - Power Quality Analyzer and fault recorder for DIN rail mounting

All-in-one power quality meter, power meter, power quality data logger and fault recorder

The EPPE RX is a compact and powerful class A power quality analyzer that also serves as a power meter, power quality logger and fault recorder. With its 8-channel measuring function, it measures 4 voltages up to 1000 V (L-L) and 4 currents up to 10/100 A with a fast sampling rate of 200 kHz and an outstanding precision of 0.05%.

The current measurement is carried out via through-type transformers, which allow the device to be installed quickly and easily in existing circuits without additional terminal points.

 

VDE-compliant and ideal for EEG systems in the medium and high-voltage grid

The EPPE RX conforms to VDE-AR-N-4110 and VDE-AR-N-4120, which makes it ideal for monitoring and compliance monitoring of EEG systems in the medium and high-voltage grid.

 

Application examples for EPPE RX:

  1. Energy quality monitoring in accordance with EN 50160
  2. Recording of energy data and load profiles
  3. Energy consumption optimization
  4. Transient recorder for detailed fault analyses
  5. Detection and recording of grid oscillations
  6. Recording of switch-on and switch-off processes
  7. Measurement of flicker and harmonics
  8. Monitoring and analysis of renewable generation plants
  9. Grid optimization
  10. Fault localization
  11. Monitoring of critical loads

Technical data

Display 4 status LEDs
Operation Web server, Operating software
Memory 32 GB Flash
Synchronization GPS, PPS, NTP/SNTP, IRIG-B, KoCoS Interlink
Interfaces 1 x RS 232, 1 x RS 485, 1 x USB, 2 x Ethernet (RJ45)
Supply voltage 85...265 VAC, 47...63 Hz 100...250 VDC, +6, -15% of nominal range
Analog inputs 4 x voltage up to 600 V (L-N), 4 x current up to 50 A, Sampling rate 200 kHz
Binary inputs 4 inputs
Binary outputs 2 x relay changeover contacts
Design Aluminum DIN-Rail housing, Protection class IP 20, Dimensions 220 x 110 x 80 mm
Standards EN 50160, IEC 61000-4-7, IEC 61000-4-15, IEC 61000-4-30 Class A

EPPE Serie

EPPE CX for Power quality measurement

 

EPPE CX

Stationary power quality monitoring system for panel mounting
Our EPPE CX is the ideal choice for fully automatic, permanent Power Quality and grid monitoring. Additionally, 16 digital inputs capture all reactions of the protection and switching devices involved, allowing grid faults and their entire chain of effects to be analyzed in a single recording. Live measurements and trends can be conveniently accessed in numerical or graphical form via the 5” touchscreen display. With its integrated alarm system, it informs you immediately in the event of irregularities

  1. Panel or DIN-rail mounting
  2. 4x voltage inputs
  3. 4x CT inputs
  4. 4x Low voltage inputs for Sensors and Transducers
  5. 16 digital inputs, 6 relay outputs
  6. 1 temperature sensor input
  7. 5 inch Touch screen display

To EPPE CX

EPPE CX for Power quality measurement

 

EPPE PX

The portable power quality solution in a carrying case
For users who require mobility, our EPPE PX offers the perfect solution. The robust case can withstand harsh environmental conditions. With additional sensor inputs, direct current inputs and full galvanically isolated analog inputs, it offers maximum flexibility for mobile measurements and system monitoring.Portable device



 

  1. 4x voltage inputs
  2. 8x current inputs (4x CT and 4 current clamp inputs)
  3. 4x Low voltage inputs for Sensors and Transducers
  4. 8 digital inputs, 2 relay outputs
  5. 1 temperature sensor input, 1 analog output
  6. 7 inch Touch screen display
     

To EPPE PX

EPPE CRX Software Screenshot

 

EPPE software

Powerful analysis for all EPPE models
Our EPPE operating software offers comprehensive analysis functions for all EPPE devices. It enables automated measuring point operation, data evaluation and reporting. With export functions to COMTRADE, PQDIF and CSV, it supports cross-manufacturer analyses.

To EPPE Software

EPPE Benefits

Optimize your energy quality with precise measurements, reliable software and the highest safety standards. Our solutions help you to identify sources of interference, reduce energy costs and ensure compliance with international standards - flexible, user-friendly and future-proof.

To the benefits

Contact

Whatever your request, we‘re here for you.
Whatever your request, we are here for you! Just enter contact details and the subject of your request and we will be happy to get back to you personally.
Or e-mail to: info(at)kocos.com
Contact   

Let‘s stay in touch!
Subscribe to the KoCoS newsletter and be the first to know about our products, updates and other news.
Subscribe     

Whatever your request, we‘re here for you.
Whatever your request, we are here for you! Just enter contact details and the subject of your request and we will be happy to get back to you personally.
Or e-mail to: info(at)kocos.com
Contact   

Let‘s stay in touch!
Subscribe to the KoCoS newsletter and be the first to know about our products, updates and other news.
Subscribe