Site map
Site map
HOME KoCoS Messtechnik AG is a leading manufacturer of measuring and test systems.PRODUCTS & SOLUTIONS 
Overview Our product spectrum consists of measuring and test systems for use in the field of power engineering. Measuring and Test Systems Innovative technologies for exceptional products - KoCoS measuring and test systems. Circuit Breaker Testing ACTAS-Professional measurement technology for circuit breaker testing/switchgear testing. Automatic test systems. Portable Equipment ACTAS Circuit Breaker Testing - The ACTAS product range offers a wide variety of different models and extension modules for specialist test situations. Systems Overview ACTAS Circuit Breaker Testing - The ACTAS product range offers a wide variety of different models and extension modules for specialist test situations. ACTAS P 22 Portable switchgear test system with up to 16 analog and 36 binary measurement inputs. ACTAS P14 Portable switchgear test system with up to 8 analog and 30 binary measurement inputs. ACTAS P6 Portable switchgear test system with up to 8 analog and 14 binary measurement inputs. ACTAS P3 ACTAS P3 is a professional test instrument for switchgear/circuit breaker testing. ACTAS P3 is small, light and extremely powerful. PROMET 100/200/300 The PROMET Ohm Meters have been developed using state-of-the-art power electronics able to generate a freely adjustable test current of up to 600 A which is fully independent of the supply voltage.
ACTAS operating software The ACTAS operating software is the first choice when it comes to carrying out comprehensive tests or test procedures.ACTAS GO The custom solution for all standard tests ACTAS 2.50 The ACTAS 2.50 operating software is the first choice when it comes to carrying out comprehensive tests or test proceduresSoftware modules The Data Interfaces software module offers various interfaces for the import and export of measurement data, test results and test object data.
Resistance Measurement The new, high-precision ohm meters of the PROMET range deliver an adjustable test current of up to 600 A which is independent of the supply voltage.Portable Equipment The PROMET Ohm Meters have been developed using state-of-the-art power electronics able to generate a freely adjustable test current of up to 600 A.PROMET 100/200/600 The PROMET Ohm Meters have been developed using state-of-the-art power electronics able to generate a freely adjustable test current of up to 600 A.
Protection Relay Testing The purpose of power system protection devices is to recognize system faults quickly and reliably and to minimize impairments to the power supply by selectively switching off faulted sections of the power system.Portable Equipment The relay test systems of the ARTES II product generation have u p to four voltage and six current signal sources with a very high output power.ARTES 440 II ARTES 440 II - 3-Phase relay test set with 6 current outputs for electromechanical, static and digital protection relays ARTES 460 ARTES 460 is a highly precise, portable measuring system especially designed for functional tests on various types of protection equipment, such as distance protection relays, for example. ARTES 330 II 3-Phase relay test set for electromechanical, static and digital protection relays. ARTES 100 The multi-functional relay test system for commissioning, maintenance and service. EPOS 340 Universal portable current and voltage source. EPOS 340 features four voltage signal sources and three current signal sources. EPOS 300 Universal portable power source. EPOS 300 features three voltage signal sources and three current signal sources.
ARTES Software The relay test systems of the ARTES II generation are operated entirely with the very latest version of the practical ARTES software.
ARTES GO The ARTES 100 test instrument can be operated and controlled from a standard PC using the ARTES GO software.
Meter Testing Dramatic advances in the field of measurementtechnology and the use of state-of-the-art micro-electronics have led to the development of a new generation of electricity meters which are far more accurate than their predecessors of just a few years ago.Portable Equipment The METES product range boasts an extensive range of portable meter test systems of various types, all of which are developed and manufactured by KoCoS.
METES Software The modular software package has been specially developed for the purpose of meter testing.
Applications The test systems of the METES range provide high-precision measurement and display of all the variables of a three-phase system, including Frequency.
Power Quality Measurement & Digital Fault Recording In view of the growing number of factors with a disturbing influence on power systems and the ever increasing sensitivity of devices and installations on the consumer side, simple monitoring criteria such as undervoltage or overcurrent are no longer adequate.Benefits to the user Power systems become transparent thanks to the continuous recording of power system activity. Sources of disturbances can be identified and potential energy savings revealed. EPPE power quality analysers EPPE measuring systems are available as table-top devices, for cabinet installation or in a portable housing for harsh environmental conditions.EPPE C8 EPPE C8 is a multifunctional measuring instrument for panel mounting which can meet the requirements of electricity generators and consumers alike.
EPPE W8 EPPE W8 is a compact power quality analyser of robust design which has been specially developed for use in harsh environmental conditions. EPPE R8 EPPE R8 is a compact power quality analyser with a housing designed for panel surface mounting which can be installed either directly or on DIN rails.
SHERLOG fault recorder systems The measuring devices of the SHERLOG range combine the monitoring functions of a high-class digital fault recorder with the features of a power quality analyser in a single system. SHERLOG CRX Fault recorder systems for professional power system and event analysis
SHERLOG CRT SHERLOG CRT has been specially designed as a decentralized monitoring system and is primarily used when the measurement points to be monitored are physically remote from one another, as is the case in switching stations or transformer substations. SHERLOG CX SHERLOG CX has been specially designed as a centralized monitoring system and is primarily used when a large number of process signals have to be monitored in one place or when a high degree of flexibility is required. SHERLOG C8/P8 The stationary SHERLOG C8 system and the portable SHERLOG P8 system are the ideal solution for general fault recorder applications and power quality analysis.
Power Sources EPOS 300 and EPOS 340 are universal current and voltage sources which come into their own whenever maximum power and high signal accuracy are required.Introduction EPOS 300 and EPOS 340 are universal current and voltage sources which come into their own whenever maximum power and high signal accuracy are required. EPOS 340 Universal portable current and voltage source. EPOS 340 features four voltage signal sources and three current signal sources. EPOS 300 Universal portable power source. EPOS 300 features three voltage signal sources and three current signal sources.
Catalytic Converter Measurement OMCAT Catalytic Converter Measuring Systems provide a fast and efficient means of carrying out complex geometrical measurements and determining the gap bulk density (GBD) of automotive catalytic converters.System Overview OMCAT PRE and OMCAT PRO are different versions of the measuring system designed to meet the requirements of a specific field of application. Measurement procedure Form and GBD tests on catalytic converters are carried out according to the same procedure, irrespective of the manufacturing method used.Measurement procedure OMCAT Catalytic Converter Measuring Systems provide a fast and efficient means of carrying out complex geometrical measurements and determining the gap bulk density (GBD) of automotive catalytic converters.
Measurement and evaluation Easy-to-use, compatible with all manufacturing methodsEasy-to-use Easy-to-use, compatible with all manufacturing methods Flexible evaluation A 1:1 comparison of the nominal contour with the actual contour and an angle-dependent graphical representation with difference vectors make it possible to adjust pass/fail criteria in line with individual requirements.
User-oriented operating concept The OMCAT operating concept is designed to meet the requirements of process technicians and production personnel alike during system setup and production. Further applications Using the geometry functions of the OMCAT software, it is possible to measure and evaluate any section or vertical surface line.
Wafer Edge Profile Measurement WATOM Wafer edge and notch profile measurement. Software modes This modular software, which has been specially developed by KoCoS for the specific purpose of geometrical measurement, is well structured and easy to use. Measurement scope The patented measurement method which uses a lightsectioning sensor can measure the profile at any point on the wafer edge, even within the notch.
Vacuum Inspection Vacuum test systems developed by KoCoS audentec GmbH are used throughout the world to check a wide range of containers, during the production process.System Overview INDEC VA 100 and INDEC VA 200 are two versions of the test system designed for different production speeds and handling methods. Structure Thanks to their modular structure and many configuration options, INDEC systems can easily be adapted to meet a wide range of different requirements. User-oriented operating concept All user controls are located on the front panel of the test device for good access and easy operation with a clear view of the process environment. Options It is easy to add to the functionality of the systems in response to changing requirements. Technical data Vacuum test systems developed by KoCoS audentec GmbH are used throughout the world to check a wide range of containers, during the production process.
