Our new ARTES 500 relay test system is now available – the direct successor to the proven ARTES 460 II. With ARTES 500, you get a future-proof test system that ideally combines performance, ease of use, and value for money.
Secure a 5% introductory discount until December 31st, 2025!
| Voltage outputs - resolution | 13 mV |
| Current outputs - 6-phase (L-N) | 6 x 0…16 A / 40 VA |
| Current outputs - 3-phase (L-N) | 3 x 0…32 A / 80 VA |
| Current outputs - 1-phase (L-N) | - |
| Analog inputs | 8 |
| Touchscreen | 3.5“” touchscreen, high-resolution, resistive, 2 function buttons and rotary selection dial |
| Voltage outputs - resolution | 10 mV |
| Current outputs - 6-phase (L-N) | 6 x 0…20 A / 50 VA |
| Current outputs - 3-phase (L-N) | 3 x 0…40 A / 100 VA |
| Current outputs - 1-phase (L-N) | 1 x 0…60 A / 100 VA |
| Analog inputs | - |
| Touchscreen | 5“ touchscreen, high-resolution, resistive, 3 function buttons and rotary selection dial |
Secure a 5% introductory discount until December 31st, 2025!
Applications
Sources
Ergonomic & compact design
The ARTES 500 is the successor model to the ARTES 460. Now even more comfortable and with targeted improvements for precisely the requirements that count.
To avoid major damage and ensure reliable operation, the protection relay testing frequency should be carefully maintained according to industry guidelines.
ARTES 500 is the compact and universal solution for testing protection relays. With its built-in, enlarged control panel and low noise level, this robust test system is equally suitable for use on site and in the laboratory.
Then contact us for free advice or find out about other products from the ARTES protection relay testing range
With high-accuracy amplifiers, a wide range of measurement inputs and, last but not least, simple handling and operation, ARTES 500 is the ideal solution for professional 3-phase relay testing.
All amplifier outputs can be set separately and independently of one another as regards phase, amplitude and frequency and are equipped with overload and short-circuit protection.
The current amplifiers provide a maximum test current of 6 x 20 A. Parallel operation of the current outputs allows output of up to 3 x 40 A for 3-phase applications and up to 1x 60 A for 1-phasig applications.
All connections and interfaces are located on the front panel. This means that the ARTES 500 protection relay tester can be operated in an upright position if there is not enough space or if no table is available.
LEDs on the front panel indicate the states and operating modes of the inputs and outputs. The user can tell at a glance which outputs are active and can easily identify the states of the binary inputs and outputs.
The internal TJCP operator interface is a special feature. Its high-resolution 5“ touch screen with smart touch technology enables many tests to be carried out quickly and easily without having to connect an external PC. The clear user interface guides the user intuitively through to complete the task in hand.
User actions carried out with the ergonomic jog wheel, such as amplitude, phase angle or frequency adjustments, are processed in real time and executed without delay.
An illuminated ring integrated in the jog wheel and additional acoustic signals indicate system status during settings and tests.
The ARTES 5 protection relay test software is a central component of all ARTES test systems and is included in the standard scope of delivery at no additional cost. It offers powerful functions that can be used uniformly for all testing systems in the ARTES product line, ensuring consistent and user-friendly operation.
With its intuitive interface, automated test parameter calculation and the ability to create individual test plans, the software simplifies even complex protection tests considerably.
Thanks to the integrated database structure, all settings and results are managed in a central location. Test reports can be generated automatically from the test results, the content and structure of which can be freely defined.
Here you can find detailed informations on the ARTES 500 Protection Relay Testing System and its applications. Brochures, application reports, technical details, specialist articles and much more.
A license number is supplied with the device, which can be used for registration in the customer area. The latest version is always available there.
No, the ARTES 5 Relay Testing software is included in the scope of delivery.
No, as the ARTES 5 Relay Testing software is supplied with all monitors, licensing has been waived.
If you are still unsure whether the product is right for you, we offer various options to provide you with the best possible support:
Feel free to contact us - we will help you find the best solution for you!
