Connection cable Trv IN for analog transducers

Shielded measurement cable, 4-core, 10 m long, for connecting an analog transducer (potentiometer) to the Trv IN input. The cable also provides the transducer with the reference voltage supplied by the test instrument. One end of the cable is fitted with a coded 5-pole push-pull plug for connection to the test instrument; the other end of the cable has an open end for connection to the transducer.

Article No.: #6304

Connection cable Inc IN for connecting digital transducers to ACTAS Px

Shielded measurement cable, 4-core, 12 m long, for connecting a digital transducer to portable ACTAS test instruments. The cable also provides the transducer with supply voltages of 5 and 24 VDC. One end of the cable is fitted with a coded 10-pole push-pull plug for connection to the test instrument; the other end of the cable has an open end for connection to the transducer.

Article No.: #6306

Connection cable CC IN for current clamp input

Shielded measurement cable, 4-core, 10 m long, for connecting a current clamp to the CC IN voltage input. One end of the cable is fitted with a coded 5-pole push-pull plug for connection to the test instrument; the other end of the cable has an open end for connection to the current clamp.

Article No.: #6307

Customized connection plug

For the transducer end of connection cable  #6304 und #6306. 

Article No.: #6188

Connection cable Aux IN for additional measurement input

Shielded measurement cable, 4-core, 10 m long, for connecting a signal to the Aux IN voltage input of the ACTAS P6. One end of the cable is is fitted with 4 mm safety plugs for connection to the switchgear device.

Article No.: #6309

Control cable PSU Ctrl for connecting external sources to ACTAS P14/P22

3 m cable for connecting up to two external voltage sources to the PSU Ctrl output. The cable is used to supply the specified values and the control signals for release and AC/DC switching to the sources. One end of the cable is fitted with a coded 14-pole push-pull plug for connection to the test instrument; the other end of the cable has an open end for connection to the source.

Article No.: #6944

Control cable PSU Ctrl for connecting external sources to ACTAS P3

3 m cable for connecting one external voltage source to the PSU Ctrl output. The cable is used to supply the specified values and the control signals for release and AC/DC switching to the source. One end of the cable is fitted with a coded 10-pole push-pull plug for connection to the test instrument; the other end of the cable has an open end for connection to the source. 

Article No.: #6947

USB-to-serial adapter with protection against external interference

High-quality adapter for connecting measuring and test systems equipped with a serial RS232 interface to a PC with a USB interface. The adapter is particularly immune to electro-magnetic disturbances. 

It enables largely interference-free operation of measuring and test systems even in areas where such systems are subject to high levels of interference.

Article No.: #1273

Adapter for connecting Trv IN to 4 mm safety sockets

Adapter for an analog sensor which is to be connected to a test system by means of 4 mm safety plugs. The safety sockets for connecting the sensor are built into a connection box. Length 30 cm.

Article No.: #6968