Systèmes portables d‘essai de disjoncteurs

Systèmes d‘essai compacts et flexibles pour les tests sur les disjoncteurs de moyenne, haute et très haute tension.

  • Extrêmement robustes et compacts
  • Essai complet de disjoncteur en une seule procédure de test
  • Pas de changement de brochage pendant le déroulement de l‘essai, donc gain de temps
  • Mode de fonctionnement autonome
  • Utilisation et analyse avec écran tactile 7“
  • Mesure de contacts PIR et principaux sur jusqu‘à 12 chambres
  • Détermination de résistance statique et dynamique sur jusqu‘à 6 chambres
  • Enregistrement et analyse de courant bobine et moteur
  • Test de déclencheur à minimum de tension et tension de déclenchement minimum
  • Tester avec mise à la terre des deux côtés

Static and dynamic measurement

High transfer resistance can be identified by measuring static contact resistance. Dynamic contact resistance measurements can be used to determine the resistance characteristic during a freely definable switching operation.

Testing with earthing on both sides

Switchgear equipment is often tested with earthing on both sides in order to prevent danger caused by capacitively coupled voltages from neighbouring components. When tests are carried out in combination with PROMET SE, measurements can be carried out with earthing on both sides.

Integrated operating and evaluation unit

The resistive 7“ touch screen, a new operating concept and extra powerful hardware make for easy operation and optimum display of all information.

Comprehensive on-site switchgear testing

Using the integrated control panel of ACTAS P260 | P360, it is possible to carry out complete tests on medium-, high- and extra-high-voltage switchgear.

Contact travel visualization

Unlike evaluation based on a simple binary signal, as is used in high-frequency measuring methods, ACTAS P260 | P360 test systems used in combination with the compact PROMET SE ohm meter enable a sound diagnosis of interrupter units throughout the whole switching operation.

Assessing the interrupter unit by analysing contact resistance

Regular measurements of the static and dynamic contact resistance allow an accurate assessment of the condition of the entire contact system.

Remote control over Wi-Fi

Because ACTAS P260 I P360 can be controlled with a smart phone, or tablet etc., the test instrument can also be operated from some distance away.

ACTAS testing software

Configuration and analysis of tests are carried out with the ACTAS testing software and the control panel located on the test system itself.
It is easy for tests to be called up, edited or used as templates. A graph of all measured signal characteristics, featuring zoom functions and measurement cursors, offers a  wide variety options for detailed analysis.

Automatic generation of test reports

The software includes an option for automatically creating test reports to document test results.


Tension de service110…265 VAC/DC
Sorties de commande pour bobines
de Fermeture
Sorties de commande pour
bobines d'Ouverture
Contacts principaux et PIR6 x 23 x 2
Courant bobine3 x 2 (I / O)1 x 2 (I / O)
Tension bobine/moteur/station31
Courant moteur via shunt11
(+  / – 10 V  /  digital)
(+  / – 10 V / 0…20 mA)
Contacts auxiliaires3 x 42 x 4
Tension de référence pour capteurs
10 VDC  / 200  mA
Connexion PC1 x Ethernet
Interfaces1 x USB A  /  1 x USB B
Interfaces pour appareils
3 x RJ45 for PROMET SE
1 x RJ45 for CSW3
Commande de source1 x numérique
Interface utilisateurÉcran 7“ graphique tactile,
et 2 touches de fonction
BoîtierValise coque rigide robuste
Indice de protectionIP65 (fermé)
Dimensions (mm)475 x 375 x 180424 x 340 x 173
Poids (kg)6,95,3

*Sous réserve de modifications