Connection unit for the connection of three PROMET SE micro-ohm meters to the ACTAS P6 test system.
Scope of delivery:
AC adapter, 3 x data cable 15 m, synchronisation lead CSW 3 - ACTAS P6 2 m, upgrade of ACTAS 2.50 testing software to ACTAS 2.60.
Article No. # 00007121
Connection unit for the connection of three PROMET SE micro-ohm meters to the ACTAS P14 and ACTAS P22 test systems.
Scope of delivery:
AC adapter, data cable 2 m, synchronisation lead CSW 3 – ACTAS P14/22, 2 m.
Article No. # 00007174
Data cable RJ45 6 A 15 m for connecting a PROMET micro-ohm meter to an ACTAS test system.
Article No. # 00007090
Cable set for connecting a PROMET SE to a measurement point for determining the static and dynamic contact resistance of an interrupter unit with a test current of up to 200 A.
Scope of delivery:
2 x high-current lead 25 mm² 3 m incl. high-current connection clamp, 2 x voltage measuring lead 3 m incl. claw clips.
Article No. # 00006228
Cable set for connecting a PROMET SE to a measurement point for determining the static and dynamic contact resistance of an interrupter unit with a test current of 100 A.
Scope of delivery:
high-current lead 10 mm² 5 m incl. high-current connection clamp, high-current lead 10 mm² 1.0 m incl. high-current connection clamp, voltage measuring lead 5 m incl. claw clip, voltage measuring lead 1.0 m incl. claw clip.
Article No. # 00007172
Cable set including accessories for connecting to a measurement point and for extension to 15 m with the standard cable set.
Scope of delivery: 2 x high-current lead 16 mm² 10 m incl. high-current connection clamp (socket and plug Ø 9 mm), 2 x voltage measuring lead 15 m incl. claw clips.
Article No. # 00006421
Cable set CS 205 for PROMET Cable set including accessories for connecting to a measurement point with a test current of 200 A.
Scope of delivery: 2 x high-current lead 25 mm² 5 m incl. high-current connection clamp (socket and plug Ø 9 mm), 2 x voltage measuring lead 5 m incl. claw clips.
Article No. # 00007377
Cable set including accessories for connecting to a measurement point with a test current of 300 A.
Scope of delivery: 2 x high-current lead 50 mm² 5 m incl. high-current connection clamp (socket and plug Ø 13 mm), 2 x voltage measuring lead 5 m incl. claw clips.
Article No. # 00007375
Cable set including accessories for connecting to a measurement point and for extension to 15 m with the standard cable set.
Scope of delivery: 2 x high-current lead 50 mm² 10 m incl. high-current connection clamp (socket and plug Ø 13 mm), 2 x voltage measuring lead 15 m incl. claw clips.
Article No. # 00007100
Cable set including accessories for connecting to a measurement point with a test current of 600 A.
Scope of delivery: 2 x high-current lead 70 mm² 5 m incl. high-current connection clamp (socket and plug Ø 13 mm), 2 x voltage measuring lead 5 m incl. claw clips.
Article No. # 00007376
Cable set including accessories for connecting to a measurement point and for extension to 15 m with the standard cable set.
Scope of delivery: 2 x high-current lead 70 mm² 10 m incl. high-current connection clamp (socket and plug Ø 13 mm), 2 x voltage measuring lead 15 m incl. claw clips.
Article No. # 00006422
Adapter for connecting high-current cables with a Ø 13 mm socket and a Ø 9 mm cable plug.
Scope of delivery:
2 reduction plugs
Article No. # 00007370
Cable for connecting to a measurement point.
Scope of delivery: 2 x voltage measuring lead 5 m incl. claw clips
Article No. # 00006423
Cable for connecting to a measurement point.
Scope of delivery: 2 x voltage measuring lead 15 m incl. claw clips
Article No. # 00006424
DAkkS certified shunt for calibrating PROMET micro-ohm meters.
Article No. # 00006993
Analog surface probe for the determination of resistances with temperature compensation,
measuring range -20...80°C. Incl. connection cable 3 m for direct connection to PROMET.
Article No. # 00006243
Digital surface probe for the determination of resistances with temperature compensation,
measuring range -55…+125°C. Incl. connection cable 3 m for direct connection to PROMET.
Article No. # 00007158
Pair of measurement clamps with increased contact pressure for the determination of low-value resistances with the four-wire method. Current connection and voltage drop connection via 4 mm safety plug. Clamp length 135 mm, clamp opening 35 mm.
Article No. # 00007169
Pair of measurement clamps for the determination of low-value resistances with the four-wire method. Current connection via 9 mm high-current plug and voltage drop connection via 4 mm safety plug. Clamp length 165 mm, clamp opening 41 mm.
Article No. # 00006298
Pair of measurement clamps with increased contact pressure for the determination of low-value resistances with the four-wire method. Current connection via 9 mm high-current plug and voltage drop connection via 4 mm safety plug. Clamp length 210 mm, clamp opening 90 mm, contact pressure 14 kg.
Article No. # 00007129
Pair of test probes with spring-loaded high current contacts for the determination of low-value resistances with the four-wire method. Length of housing: 170 mm, contact diameter: 20 mm, test current up to 200 A.
Article No. # 00007383
Active current clamp with switchable 40/400 AAC or 60/600 ADC measuring ranges for measuring direct and alternating currents, including connection cable 2 m.
Article No. # 00007157
Robustly made, padded transport bag, round design, with shoulder strap. The bag is fitted with reinforced panels for dimensional stability and features a separate compartment for accessories as well as a further removable bag.
Article No. # 00007315
Extremely robust, water- and dust-proof carrying case. Easy handling due to telescopic handle and rollers, two mounts for padlocks. The case is delivered with a hard foam insert that fits the unit exactly. The hard foam insert is equipped with additional compartments for measuring cables and accessories.
External dimensions 826 x 533 x 312 mm, weight: 10,2 kg.
Article No. # 00007399
