Modular system structure

Thanks to their modular structure and many configuration options, INDEC systems can easily be adapted to meet a wide range of different requirements. The INDEC test device is always the central component of the test system. All cabling,the power cable included, is routed through the connection unit of the system. This makes it easy to replace components or add new ones without having to disconnect existing cable connections.

The connection unit provides all the necessary cable inputs enabling components to be connected directly without an intermediate junction box.

“Plug and play“ sensor swap

INDEC vacuum test systems can be equipped with various different sensor heads. Sensors can be connected quickly and easily by plug-in connection.

The system does not need to be shut down for the purpose and is ready for operation immediately as no further intervention is required.

Should production conditions change, INDEC can be adapted accordingly by fitting an appropriate sensor.

Ejector unit

compact and pre-assembled

The components of the ejector unit are pre-mounted on a base plate, ready for operation. The entire unit can be fixed directly to the conveyor and is ready for operation as soon as connections are made to the compressed air and electricity supplies.

Because of its compact design, the ejector can be installed at any point in the production line.

The ejector unit is provided with pre-drilled holes enabling users to integrate the ejector unit in the production environment and install additional components themselves.

The ejector and the holding bracket can easily be adjusted to suit container dimensions.